The Lazer range of inks was especially formulated for the flexo printing of PVC shrink film on the slower narrow web printers. This ink system reduced with suitable reducers can be used for both process and general line work.
Read More
Properties
Low solvent retention
Good adhesion
High gloss
Heat resistance of 140°C @ 40 PSI 0.5 sec dwell time
Supply viscosity 40 to 45 seconds Zahn #2 @ 25ºC
Print viscosity 28 to 32 seconds Zahn #2 @ 25ºC
Wash up
Dowanol: Ester Blends
Colour Range
A full spectrum of colour pigments are available in the Lazer Range, which may only be limited by selection for specific applications. They are of reasonable light fastness but may not be suitable for extended exposure to direct sunlight. If requirements for more resistant pigments are needed, these should be stated at the time of ordering.
BCF
These inks have been formulated in accordance with the recommendation of the British Coatings Federation.
Waste disposal
Care should be exercised in the disposal of printing ink waste. This should be carried out in accordance with good industrial practice observing all the appropriate regulations including the relevant guideline notes to the Environment Conservation Act and Regulations (73/1989).
Health and Safety
Full details appear on the Material Safety Data Sheets
The information outlined here is given in good faith but does not constitute a guarantee. Since conditions of handling and application are beyond our control, the converter should assure himself of the suitability of the product for the particular end use. It is recommended that advice be taken from Hi-Tech Inks’ Technical Department for all new applications and it is preferable for trials to be carried out before full production runs are commenced.
